Console Commands

CPM has a lot of functionality, more so than most people realize, and it's very easy to miss some very helpful configuration settings that allow you to use the more useful features.

TIP

New command prefix

Starting with CPM 5.35, all CPM-specific commands have been given the prefix 'cpm-' to identify which mod they are part of. As a result, commands like 'brender' are now named 'cpm-brender'; however, an alias has been added to the older name, so that Admins with experience in the older names can still use them. As an example, all three of the following commands would be valid and produce the same result:

• cpm-chatgroupcolor
• chatgroupcolor
• cgc

You can type 'help' to see all possible commands, and any command provided by CPM will have the prefix listed. Alternately, to only see CPM-related commands, you can type 'cpm-help' instead.

High-level

This section will go over the quick-set commands you can use to configure the high-level functionality.

an

The AN command configures the Nighttime announcer, which is a script that warns players that night is approaching, which is especially useful for both horde night, and servers that have zombies running after dark. Recommended settings are:

an true
an warnhours 3
an announcer Botname

The above settings will enable the announcer, provide a 3-hour warning before in-game darkness, and all alerts and warnings will be sent by the server with the name 'Botname', which you can change to be anything you want.

hccp

The hide chat command prefix feature allows you to hide player chat that is related to CSMM/CPM commands. For example, if a player types /claim in order to obtain their shop purchases, hccp would prevent that chat from appearing in the game.

hccp /,$

The above command will hide all chat lines that begin with the / or $ characters. CSMM uses $ by default for commands, and CPM uses / by default for commands. The comma that separates the two symbols is required.

pfb

The prevent falling blocks feature was added to reduce or eliminate huge drop mining collapses within the game. When PFB is enabled, any block that would drop due to structural integrity issues will instead simply vanish. This prevents sand/gravel drop mining from causing hundreds of blocks to fall at once, which will often lag or crash a server completely. Similarly, if you destroy the structural supports for a base and cause it to drop, the affected blocks will simply cease to exist. PFB also generates a log line entry in the console, which can be captured via a Discord notification and sent to the admin team in Discord.

pfb 20

If PFB is set to any value above zero, it will vanish falling blocks; the numeric parameter of the pfb command only specifies how large the collapse must be before it is recorded as a log event. This prevents PFB from spamming the console log with 1-2 dropped block events when players destroy temporary frames or mostly-collapsed small structures in-game. A value of 20 is recommended for PFB.

scn

The Server Chat Name feature allows you to customize the 'Name' of the server when it sends chat messages via CPM. Typically, this would be the same value as the 'an announcer' command above.

scn Botname

Reference

CPM has a built in function to list all avalaible console commands (cpm-help), which give you a global description of the available commands. For detailed info on a command do:

help <command>

Following here is a reference list of all commands included with CPM, Allocs fixes and the base game.

Also available as JSON

Command	Description	Help
admin	Manage user permission levels	Set/get user permission levels. A level of 0 is maximum permission, users without an explicitly set permission have a permission level of 1000. Usage: admin add <name / entity id / platform + platform user id> <level> [displayname] admin remove <name / entity / platform + platform user id> admin addgroup <steam id> <level regular> <level mods> [displayname] admin removegroup <steam id> admin list To use the add/remove sub commands with a name or entity ID the player has to be online, the variant with platform and platform ID can be used for currently offline users too. Displayname can be used to put a descriptive name to the ban list in addition to the user's platform ID. If used on an online user the player name is used by default. When adding groups you set two permission levels: The 'regular' level applies to normal members of the group, the 'mods' level applies to moderators / officers of the group.
AdminSpeed	AdminSpeed
ai	AI commands	AI commands: latency - toggles drawing pathlines - toggles drawing editor path lines pathgrid - force grid update ragdoll <force> <time> rage <speed> <time> - make all zombies rage (0 - 2, 0 stops) (seconds) sendnames - toggles admin clients receiving debug name info
aiddebug	Toggles AIDirector debug output.
audio	Watch audio stats	Just type audio and hit enter for the info.
automove	Player auto movement	Parameters: x z angle - move by x (left/right) and z (forward) and turn by angle per second
ban	Manage ban entries	Set/get ban entries. Bans will be automatically lifted after the given time. Usage: ban add <name / entity id / platform + platform user id> <duration> <duration unit> [reason] [displayname] ban remove <name / entity id / platform + platform user id> ban list To use the add/remove sub commands with a name or entity ID the player has to be online, the variant with platform and platform ID can be used for currently offline users too. Duration unit is a modifier to the duration which specifies if in what unit the duration is given. Valid units: minute(s), hour(s), day(s), week(s), month(s), year(s) Displayname can be used to put a descriptive name to the ban list in addition to the user's platform ID. If used on an online user the player name is used by default. Example: ban add madmole 2 minutes "Time for a break" "Joel"
bents	Switches block entities on/off	Use on or off or only the command to toggle
buff	Applies a buff to the local player
buffplayer	Apply a buff to a player	Usage: buffplayer <player name / steam id / entity id> <buff name> Apply the given buff to the player given by the player name or entity id (as given by e.g. "lpi").
camera	Lock/unlock camera movement or load/save a specific camera position	Usage: 1. cam save <name> [comment] 2. cam load <name> 3. cam list 4. cam lock 5. cam unlock 1. Save the current player's position and camera view or the camera position and view if in detached mode under the given name. Optionally a more descriptive comment can be supplied. 2. Load the position and direction with the given name. If in detached camera mode the camera itself will be adjusted, otherwise the player will be teleported. 3. List the saved camera positions. 4/5. Lock/unlock the camera rotation. Can also be achieved with the "Lock Camera" key, currently bound to ''.
chunkcache	shows all loaded chunks in cache
chunkobserver	Place a chunk observer on a given position.	Usage: 1. chunkobserver add <x> <z> [size] 2. chunkobserver remove <x> <z> 3. chunkobserver list 1. Place an observer on the chunk that contains the coordinate x/z. Optionally specifying the box radius in chunks, defaulting to 1. 2. Remove the observer from the chunk with the coordinate, if any. 3. List all currently placed observers
chunkreset	resets the specified chunks	Usage: 1. chunkreset <x1> <z1> <x2> <z2> 2. chunkreset [f] 1. Rebuilds the chunks that contain the given coordinate range. 2. Can only be executed by a player in the ingame console! Behaviour depends on whether the player is currently within the bounds of a POI: Within a POI: The POI is reset. Not within a POI: The chunk the player is in and the eight chunks around that one are rebuilt. Not deco! Does not reload POI data! d - regen deco f - fully regenerates chunks (may cause double entities!) u, utimed, ue - Unload chunks or entities
commandpermission	Manage command permission levels	Set/get permission levels required to execute a given command. Default level required for commands that are not explicitly specified is 0. Usage: cp add <command> <level> cp remove <command> cp list
cpm-additemloot, additemloot	add item to SecureLoot below the given entity	add item to SecureLoot below the given entity Usage: 1. additemloot <name / entity id> <loot_slot_number> <item name> <stackSize> <quality> <used> 2. additemloot <name / entity id> <item name> <stackSize> <quality> <usedTimes> 1. add an item at SecureLoot at slot_number 2. add an item at SecureLoot at first slot available *if the item does not have quality, set the quality number as 1 *if the item does not have used, set the number as 0. This number is a % of used. 0% means new full item. 100 means totally broken
addfriend	Add yourself to a player friends list and vice versa.	Usage: af <platformID> Add yourself to the friendlist of <platformID> and vice versa
cpm-announcenighttime, announcenighttime	Turn NightTime announcement on/off	Usage: 1. an true/false 2. an warnhours <hours> 3. an announcer <name> 4. an nighttimetext <string> 5. an blooddaytext <string> 6. an blooddaytomorrowtext <string> 7. an counterdaytext <string> 8. an 1. Turn AnnounceNightTime ON (true)/OFF(false) 2. Set the number of <hours> before 22:00 warning 3. Set the name of the announcer 4. Set the text for nighttime warning. {hours} will be replaced by the warnhours setting 5. Set the text for announcing bloodmoon is tonight 6. Set the text for announcing bloodmoon is tomorrow 7. Set the text for normal bloodmoon counter text. {daysleft} will be replaced by remaining days 8. List active AnnounceNightTime settings All text and announcer name support (nested) color coding. The value of <string> has to be wrapped in "double quotes". Put text between [colorCode]text here[-] for giving it a color.
cpm-arrest, arrest	Put a player in jail (reversed claim jail required!)	Put a player in jail (reversed claim jail required!) Usage: arrest <Name/EntityId/SteamId> arrest <Name/EntityId/SteamId> <jailTime(Minutes)>
cpm-bcheck, bcheck	Checks the type of block by coordinates or under your feet.	Usage: 1. bcheck <x> <y> <z> 2. bcheck 1. check the block at x, y, z. 2. check the block under your feet.
cpm-bdup, bdup	Copy an Area to another location	Usage: 1. bdup <x1> <x2> <y1> <y2> <z1> <z2> <x> <y> <z> <rot> 2. bdup p1 3. bdup p2 4. bdup <x> <y> <z> <rot> 5. bdup <rot> 1. duplicate the defined area on x,y,z 2. Store on position 1 your current location 3. Store on position 2 your current location 4. use stored position 1 and 2 to duplicate on x,y,z 5. use stored position 1 and 2 to duplicate on your current location <rot> prefab rotation -> need to be equal 0,1,2 or 3
cpm-bexport, bexport	Exports as Prefab some space	Usage: 1. bexport <x1> <x2> <y1> <y2> <z1> <z2> <prefab_file_name> [overwrite] 2. bexport 3. bexport <prefab_file_name> [overwrite] 1. Export the defined area to a prefabFile in folder .../UserData/LocalPrefabs/ 2. Store the player position to be used togheter on method 3. 3. Use stored position on method 2. with current position to export the area to prefab File in folder .../UserData/LocalPrefabs/ NOTE: Sleepervolumes are lost during this process. See brender for more information.
cpm-bmsAddMaxAlive, bmsAddMaxAlive	Add to the number of maximum alive zombies on server setting.	Usage: bmsAddMaxAlive <count> bmsAddMaxAlive
cpm-bmsAdjustForOnlinePlayers, bmsAdjustForOnlinePlayers	Enable or disable the automatic adjusting of BloodmoonEnemycount to nr. of online players	Usage: bmsAdjustForOnlinePlayers <true/false> bmsAdjustForOnlinePlayers
cpm-bmsEnemyCount, bmsEnemyCount	Set the maximum nr. of zombies alive per player on bloodmoons	Usage: bmsEnemyCount <count> bmsEnemyCount
cpm-bmsOverrideVanillaSpawner, bmsOverrideVanillaSpawner	Enable/Disable vanilla bloodmoon spawner override.	Usage: bmsOverrideVanillaSpawner <true/false> bmsOverrideVanillaSpawner
cpm-brender, brender	Renders a Prefab on given location	Usage: 1. brender <prefab_file_name> <x> <y> <z> <rot> [nosleepers] [addtorwg] 2. brender <prefab_file_name> <rot> [nosleepers] [addtorwg] 3. brender <prefab_file_name> <rot> <depth> [nosleepers] [addtorwg] <rot> prefab rotation -> needs to be equal to 0,1,2 or 3 1. Render prefab on <x> <y> <z> location 2. Render prefab on your position 3. Render prefab on your position with y deslocated <depth blocks> NOTE: Sleeper control is ONLY possible on prefabs that are present in prefabs.xml (world folder) that is used to create the map (RWG). NOTE: Use parameter "addtorwg" to permanently add this prefab to the current RWG world. Can be reset like any other RWG prefab and will still be in world after a wipe. Will cause re-download of world for clients!
cpm-brepblock, brepblock	Replace blocks from a defined location	Usage: 1. brepblock <block_to_be_replaced> <block_name> <x1> <x2> <y1> <y2> <z1> <z2> 2. brepblock <block_to_be_replaced> <block_name> <x>@<qnt> <y>@<qnt> <z>@<qnt> 3. brepblock <block_to_be_replaced> <block_name> <qnt> <qnt> <qnt> 4. brepblock <block_name> 5. brepblock p1 6. brepblock p2 <block_to_be_replaced_name or id> <block_name> 1. replace blocks block_to_be_replaced with block_name from x1,y1,z1 to x2,y2,z2 2. replace blocks block_to_be_replaced with block_name from x,y,z each quantity. Quantity can be posivite or negative. 3. replace blocks block_to_be_replaced with block_name from your position each quantity. Quantity can be posivite or negative. 4. Search for block names. Fill with * to list all. 5. Store your position to be used on method 6. 6. replace blocks block_to_be_replaced with block_name from position stored on method 5 until your current location.
blockutf8names	Kick any players with UTF-8 chars in name at login	Usage: bun <true/false> bun
cpm-bundo, bundo	Undo last prefab command	Usage: 1. bundo 1. Undo prefabs command. Works with brender, fblock, brepblock and bdup By default the size of undo history ise set to 1. You can change the undo history size using "setbundosize"
cpm-ccc, ccc	Manage advanced claims	Add/Remove/List/Configure advanced claims Usage: 1. ccc add <claimid/steamid> <w_boundary> <e_boundary> <n_boundary> <s_boundary> <accessLevel> [<type>] 2. ccc remove <claimid/steamid> 3. ccc list 4. ccc wl add <claimid/steamid> <steamid> 5. ccc wl remove <claimid/steamid> <steamid> 6. ccc p1 7. ccc p2 <claimid/steamid> <accessLevel> [<type>] 8. ccc radius <radius> <steamId/entityId/Name> <claimid/steamid> <accessLevel> [<type>] 1. Add a claim. Use steamid of player in the name when using as playerclaim. For normal claims leave type empty. Possible types: reversed, leveled, timed, hostilefree, portal, openhours 2. Delete claim with name <claimid/steamid> 3. List all advanced claims 4. Add a steamid to the whitelist of claim <claimid/steamid> 5. Remove a steamid from the whitelist of claim <claimid/steamid> 6. Store your position for use with 7. 7. Add a claim with coordinates set by 6 and current position. 8. Add a claim with boundaries on <radius> distance from <steamId/entityId/Name> position.
chatcommandpermissions	Set permission levels on admin chatcommands	Usage: ccp <command> <pemissionlevel> ccp list <command> can be ft, ftw, mv, mvw, tb, rt, get, listwp, setwp, delwp, ls, bag, rtc, day7, hostiles, bed, loctrack and bubble
cpm-chatgroupcolor, chatgroupcolor	Manage chat color by groupmembership.	Manage chat color by groupmembership. Usage: cgc listgroups cgc addgroup <groupName> <groupColor> cgc deletegroup <groupName> cgc listmembers <groupName> cgc adduser <steam id/player name/entity id> <groupName> cgc cleargroup <steam id/player name/entity id> The <groupColor> must be 6 hex characters. Example: FF00FF
cpm-checkloot, checkloot	check items from SecureLoot below the given entity	check items from SecureLoot below the given entity Usage: 1. checkloot <name / entity id> [<tag>] 1. check items at SecureLoot under a player
cpm-cpmprefix, cpmprefix	Set prefix for CPM chatcommands.	Usage: cpmprefix <prefix> cpmprefix
cpm-cs, cs	Spawn scouts near a player or coordinate	Call scouts near a player.Usage: cs <steam id/player name/entity id> or cs <x> <y> <z>
checkvehiclecontent	check the content of a vehicle.	cvc <vehicleID>
deactivatebed	Deactivate a players bed(roll).	Usage: 1. db <steamid/XblId> Deactivate the active bed (roll) of a player by SteamID
donorslot	Add, Remove and View platformIDs on the ReservedSlots list.	Usage: 1. ds add <platformID> <playerName> <days to expire> 2. ds remove <platformID> 3. ds list 4. ds donorbuffer <number of players> 5. ds enabled <true/false> 1. Adds a platformID to the DonorSlots list 2. Removes a platformID from the DonorSlots list 3. Lists all platformIDs that have a DonorSlot 4. Set the number of donor slots for donors 5. Enable/Disable donor slots for donors
cpm-entityremove, entityremove	remove entity from game	Removes an entity from the game. Usage: 1. entityremove entityID 1. Remove an entity from game
executeonclient	Let a local player fire a local only console command.	Let a local player fire a local only console command Usage: eoc <Name/EntityId/SteamId> "command param1 param2" use single quotes for parameters that contain spaces in remote command.
cpm-etele, etele	Teleport an entity	Teleport an entity. Usage: 1. etele entityID <x> <y> <z> [rot] 2. etele entityID <player_id> [rot] 1. Teleport an entity to a location 2. Teleport an entity to player location
cpm-fblock, fblock	Fill a defined area with a specific block	Usage: 1. fblock <block_name> <x1> <x2> <y1> <y2> <z1> <z2> 2. fblock <block_name> <x>@<qnt> <y>@<qnt> <z>@<qnt> 3. fblock <block_name> <qnt> <qnt> <qnt> 4. fblock <block_name> 5. fblock p1 or pblock L1 6. fblock p2 <block_name> 1. fill blocks with block_name from x1,y1,z1 to x2,y2,z2 2. fill blocks with block_name from x,y,z each quantity. Quantity can be posivite or negative. 3. fill blocks with block_name from your position each quantity. Quantity can be posivite or negative. 4. Search for block names. Fill with * to list all. 5. Store your position to be used on method 6. p1 store your position, L1 store the position where you are looking at 6. Place blocks with block_name from position stored on method 5 until your current location.
cpm-fblock1, fblock1	place one block at a time without the need of chunkreloading (RPC)	Usage: 1. fblock1 <blockname> <x> <y> <z> 1. Place one block on position x,y,z
cpm-gc, gc	Invoke the garbagecollector. Free some memory.	Usage: gc
cpm-getbicycle, getbicycle	Get lost or stuck bicycle to player	Get bicycle Usage: getbicycle <steam id/player name/entity id>
cpm-getbike, getbike	Get lost or stuck minibike to player	Get minibike Usage: getbike <steam id/player name/entity id>
cpm-getblimp, getblimp	Get lost or stuck blimp(jetpack) to player	Get blimp Usage: getblimp <steam id/player name/entity id>
cpm-getdrone, getdrone	Get lost or stuck drone to player	Get drone Usage: getdrone <steam id/player name/entity id>
cpm-getgyrocopter, getgyrocopter	Get lost or stuck gyrocopter to player	Get gyrocopter Usage: getgyrocopter <steam id/player name/entity id>
cpm-gethelicopter, gethelicopter	Get lost or stuck helicopter to player	Get helicopter Usage: gethelicopter <steam id/player name/entity id>
cpm-getjeep, getjeep	Get lost or stuck jeep to player	Get jeep Usage: getjeep <steam id/player name/entity id>
cpm-getmotorcycle, getmotorcycle	Get lost or stuck motorcycle to player	Get motorcycle Usage: getmotorcycle <steam id/player name/entity id>
cpm-getprefab, getprefab	Get info/manage the RWG prefab you are standing in.	Usage: 1. getprefab [steamId/entityId/name] reset 2. getprefab exclude 3. getprefab exclude type 4. getprefab 1. Reset the RWG prefab you are standing in (or [steamId/entityId/name] is standing in). 2. Exclude the RWG prefab you are standing in from resets by unique name 3. Exclude the RWG prefab you are standing in from resets by type 4. Get info on the RWG prefab you are standing in.
cpm-giveplus, giveplus	give an item to a player(s) (entity id or name)	Give item(s) to a (all) player(s) by putting in backpack of player(s) Usage: giveplus <name/entityId/steamId> <item name> <amount> [<quality> <usedTimes>] giveplus all <item name> <amount> [<quality> <usedTimes>] Either pass the full name of a player or his entity id (given by e.g. "lpi"). Item name has to be the exact name of an item as listed by "listitems". Quality is the quality of the dropped items for items that have a quality. usedTimes is the % that the item was used.
cpm-got, got	give items to or trade items with other player	give items to or trade items using a tradingchest Usage: 1. got list 2. got lvi <name / entity id> 3. got lti <name / entity id> 1. list stored tradingchests 2. list items in virtual tradingchest of player 3. list items in real tradingchest of player
cpm-grablcb, grablcb	Put all landclaims within <radius> of and owned by player in his/her backpack.	Usage: 1. grablcb <steamid / entityid / name> <radius> 1. Put all landclaims within <radius> and owned by player in his/her backpack.
cpm-help, help	Help on console and specific CSMM Patrons Mod commands	Type "cpm-help" for an overview of CSMM Patrons Mod commands
cpm-hidechatcommand, hidechatcommand	specify a chat message prefix that defines chat commands that are hidden from chat	If used chat messages starting with the defined prefix (e.g. "/") will not be shown to other players.Usage: hccp - If used without any parameter this functionality is disabled hccp <string pattern> - do not use string pattern with spaces and dont use comma for prefix. - define the prefix for chat commands - define multiple prefixes for chat commands by comma seperated list hccp list - show configured prefixes Example: hccp / or hccp #,$ - Chat messages like "/help" or "$help" will be hidden
listcustomentity	List entity with custom parameter for better filtering.	List entity with custom parameter for better filtering: 1. lce <x> <z> <radius> <type> 2. lce <xMin> <xMax> <zMin> <zMax> <type> 3. lce <type> Valid types: Zombie, SupplyCrate, Backpack, Item, Animal, Minibike, Trader, Player, Jeep, Bicycle, Motorcycle, Gyrocopter Use type as * to not filter the list by type
listcpmplayers	Lists all cpm players ever online.	Usage: 1. listcpmplayers 2. listcpmplayers online 3. listcpmplayers <player name / UserId> 1. Lists all players that have ever been online 2. Lists only the players that are currently online 3. Lists all players whose name contains the given string or matches the given UserId(Steam/EOS)
cpm-listbedplayer, listbedplayer	list bed locations of all players or a specific player	Usage: 1. lpb <steam id / player name / entity id> or 2. lpb *this will list all players online and their bed
cpm-listbuffs, listbuffs	List or search all available buffs	List or search all available buffs Usage: 1. lbuffs <searchstring> 2. lbuffs
cpm-listfriendsplayer, listfriendsplayer	list friends of a single player or all players	Usage: 1. lfp <steam id / player name / entity id> 2. lfp (to list all players friends)
cpm-listplayerbuffs, listplayerbuffs	List players active buffs	List players active buffs Usage: 1. lpbuffs <name / entity id> 2. lpbuffs
cpm-listplayerskill, listplayerskill	list players Skills	list players Skills Usage: 1. lps <name / entity id> 2. lps
cpm-loctrack, loctrack	Manage locationtracker settings and data	Manage locationtracker settings and data Usage: 1. loctrack search <steam id/player name/entity id> <radius> <numberOfHours> 2. loctrack search <x> <y> <z> <radius> <numberOfHours> 3. loctrack showtrack <steam id> <maxrecords> <timespan> <timeBetweenRecords> 4. loctrack enabled <true/false> 5. loctrack command <newChatCommand> 6. loctrack commandenabled <true/false> 7. loctrack interval <seconds> 8. loctrack maxagedata <hours> 9. loctrack neardistance <meters> 10. loctrack responsecolor <hexstring> 11. loctrack 1. list players within <radius> of <steam id/player name/entity id> last <numberOfHours> 2. list players within <radius> of <x> <y> <z> last <numberOfHours> (use y=-1 to ommit y search) 3. show location tracks of <steam id>. Maximum records <maxrecords>. Minimum time between records <timeBetweenRecords> (seconds). Within <timespan> (MMddHHmm-MMddHHmm). 4. Enable / Disable location recording 5. Define the ingame chatcommand (include the prefix) 6. Enable/Disable ingame chatcommand for querying databases 7. Set the interval of recording locations (seconds) 8. Set the maximum time the data stays in databases (hours)(0=forever) 9. Set the distance for use with chatcommand for reporting near live players 10. Set the responsecolor for use with chatcommand. Has to be 6 long hexadecimal number 11. Show all active location tracking settings
markresetregion	Manage the reset regions list.	Usage: mrr mrr add [<regionName>] mrr add <w_boundary> <e_boundary> <n_boundary> <s_boundary> mrr remove [<regionName>] mrr remove <w_boundary> <e_boundary> <n_boundary> <s_boundary> mrr list mrr notificationtext <enter:exit>
cpm-multipleentityspawn, multipleentityspawn	spawn multiple entities around some coordinate or player	Spawn multiple entities around some coordinate. Type "mes" to see all entity types Usage: mes <x> <y> <z> <spawn radius> @ [<list of entities>] or mes <x> <z> <spawn radius> @ [<list of entities>]> or mes <steam id/player name/entity id> <spawn radius> @ [<list of entities>] Example mes -1520 860 15 @ 1 1 18 18 21 21 21
cpm-mutechatplayer, mutechatplayer	mute a player on public chat	Mute a player on public chat.Usage: mcp <steam id/player name/entity id> [true/false] If the optional parameter is not given the command will show the current status.
cpm-mv, mv	Move player command (to coordinates and to other player). Optionally restrict to friends only.	Usage: mv <playerName/steamId> <playerName/steamId> [fo] mv <playerName/steamId> <xxE/W> <xxN/S>
cpm-mvw, mvw	Move player to waypoint.	Usage: mvw <playerName/steamId> <waypointName> mvw listwaypoints
ownvehicle	take ownership of a vehicle.	ov <vehicleID>
cpm-overridechatname, overridechatname	Change a player's chat name.	Change a player's chat name. Usage: ocn <steamId / entityId / playerName> <newName> ocn <steamId / entityId / playerName> clear ocn list
cpm-own, own	define an owner to SecureLoot/SecureDoor for a player.	define an owner for SecureLoot/SecureDoor for a player. After using this command you may need to leave and reenter the game to take effect. 1. own <x> <y> <z> <entity_id> 2. own <x> <y> <z> 3. own <entity_id> <entity_id_new_owner> 4. own <entity_id> 5. own 1. x,y,z defines the location of SecureLoot/SecureDoor/Signs and the entity_id is the new owner 2. x,y,z defines the location of SecureLoot/SecureDoor/Signs and you are the new owner 3. the location of secure SecureLoot/SecureDoor/Signs if bellow entity_id and the entity_id_new_owner is the new owner 4. the location of secure SecureLoot/SecureDoor/Signs if bellow your player and the entity_id is the new owner 5. the location of secure SecureLoot/SecureDoor/Signs if bellow your player and you are the new owner
permadeath	Manage permadeath players	Usage: pd add <steamId> pd remove <steamId> pd list
preventfallingblocks	Prevent falling blocks on server.	Usage: 1. pfb <logBlockCount> (0 = disabled, blocks do fall) 2. pfb 1. Enable/Disable prevention of falling blocks. Log when number of blocks falling at once exceed <logBlockCount>. 2. Show the active <logBlockCount> setting.
cpm-playerchatcolor, playerchatcolor	Change default player chat color.	Change the player`s chat color.Usage: pcc <steam id/player name/entity id> <color> <nameOnly> the <color> must be a 6 hex characters. Example: FF00FF the <nameOnly> must be a 1 to color only name and 0 to color all text the default chat color is FFFFFF
cpm-playsound, playsound	Play an ingame sound on any server/player position.	Play an ingame sound on any server/ player position. Usage: 1. playsound <steamId/playerName/entityId> <soundName> 2. playsound <x> <y> <z> <soundName> 3. playsound listloops 4. playsound stop <x> <y> <z> <soundName> 5. playsound <searchString> 6. playsound 1. Play a sound on the current postion of a player 2. Play a sound on position x,y,z 3. List all sounds that are playing in a loop 4. Stop a sound that is played in loop (check listloops) 5. Search for a soundname by (partial) string 6. List all available sounds
cpm-protectplayer, protectplayer	Set protective bubble on player.	Usage: protect <Name/steamId> protect list
resetdronedata	Remove owned drone data from a player	Usage: rdd <name/entityId/platformID>
removeexpdeficit	Remove a player's ExpDeficit.	Usage: red <entityID>
cpm-release, release	Release a player from jail.	Release a player from jail. Usage: release <Name/EntityId/SteamId>
cpm-remitem, remitem	remove items from SecureLoot below the given entity	Removes items from SecureLoot below the given entity Usage: 1. remitem <name / steamId / entityId> 1. Remove all items from SecureLoot under <name / steamId / entityId>
cpm-removelandprotection2, removelandprotection2	removes the association of a land protection block without players needing to be near	Usage: 1. rlp2 <steamid> 2. rlp2 <x> <y> <z> 3. rlp2 nearby [length] 4. rlp2 cleanup 1. Remove all land claims owned by the user with the given SteamID 2. Remove only the claim block on the exactly given block position 3. Remove all claims in a square with edge length of 64 (or the optionally specified size) around the executing player 4. Remove all expired landclaims from the world
cpm-rendermap, rendermap	Render the current map to maptiles for cpmcc
cpm-resetadvclaim, resetadvclaim	Reset the area(s) covered by Adv. Claim Reset to RWG default on chunk level.	Usage: resetadvclaim [unclaimed] [kicklockreboot] Reset all area(s) covered by Adv. Claim Reset to RWG default on chunk level. Use parameter kicklockreboot to kick online players and lock server during reset. Reboots server when done. Use parameter unclaimed to reset all BUT claimed chunks (takes a long time!).
cpm-resetchunks, resetchunks	Reset chunks to RWG default.	Usage: 1. resetchunks p1 2. resetchunks p2 3. resetchunks radius <radius> <steamId/entityId/Name> 1. Store your position to be used on method 2. 2. Reset chunks from position stored on method 1 until your current location(p2). 3. Reset chunks within boundaries on <radius> distance from <steamId/entityId/Name> position.
cpm-resetregionsnow, resetregionsnow	Execute shutdown immediately and reset marked regions.	Usage: resetregionsnow
cpm-resetrwgprefabs, resetrwgprefabs	Reset all RWG prefabs. Exclude claimed prefabs in CpmSettings.xml	Usage: 1. rrp [tradersonly] [kicklockreboot] 1. Reset all RWG prefabs live on the map. Use parameter kicklockreboot to kick online players and lock server during reset. Reboots server when done. Exclude claimed prefabs in CpmSettings.xml (ResetPrefabs_ExcludeClaimedPrefabs).
cpm-resetunclaimedregionsnow, resetunclaimedregionsnow	Execute shutdown immediately and reset ALL regions except the ones that have LCB/Normal Adv. Claim on.	Usage: resetunclaimedregionsnow
resetlevel	Reset a player's level to a given value.	Usage: rl <platformID> <level> Reset a player's level to <level>
resetplayerdata	Reset a player	Usage: resetplayerdata <platformID>
resetskillpoints	Reset a player's skillpoints to a given value	Usage: rs <platformId> <count> Reset a player's skillpoints to <count>
repairtrees	Repair indestructable trees (only with damageindicator)	Repair indestructable trees (only with damageindicator) Usage: rt (list bugged trees) rt repair (repair bugged trees)
removevendingrental	Remove a player's vendingmachine rental status	Usage: rvr <steamId>
cpm-say2, say2	Sends a message to all connected clients with specific sender	Usage: say2 <senderName> <message>
cpm-sayadmin, sayadmin	Send a PM to all players meeting the minimum receipients permisson level	Usage: sayadmin <chatName> <levelReceipients> <message> Send a PM to all players meeting the minimum receipients permisson level
cpm-sayplayer2, sayplayer2	send a message to a single player with a specific sender name	Usage: pm2 <sender playerName> <receiver player name / steam id / entity id> <message> Send a PM from a player to another player, both given by the player name or steam / entity id (as given by e.g. "lpi").
serverchatname	Set server chatname globally	Usage: scn <name> scn
setdeathcount	Set a player's deathcount.	Usage: sdc <name/entityId/platformID> <count> Use operators + and - to add or subtract to/from deathcount (ex. +5 or -1) Without operator the new deathcount will be <count>
cpm-setbundosize, setbundosize	Set the size of history on bundo	Set the size of history on bundoUsage: 1. setbundosize <size> 2. setbundosize 1. Sets the bundo History Size 2. Gets the bundo History Size
cpm-setplayerstatus, setplayerstatus	Change players attributes (zombiekills, playerkills)	Change players attributes (zombiekills, playerkills) Usage: 1. sps <name/entityId/steamId> <status> <value> 2. <Status> can be: zkills, pkills
cpm-shutdownba, shutdownba	Timed shutdown with bloodmoon awareness.	Usage: shutdownba <minutes> [reset] [resetunclaimed] [resetvehicles] [resetdrones] shutdownba stop shutdownba delayfrom <inGameHour> shutdownba delayuntil <inGameHour> shutdownba counttext <text> shutdownba delaytext <text>
cpm-sleepers, sleepers	Remove sleepervolumes from world	Usage: 1. sleepers p1 2. sleepers p2 3. sleepers p2 remove 4. sleepers p2 reset 5. sleepers x1 z1 x2 z2 reset 1. Store position for use with p2 2. Show sleepervolume count from stored pos p1 to p2 3. Remove sleepervolumes from stored pos p1 to p2 4. Despawn and reset sleepervolumes from stored pos p1 to p2 5. Despawn and reset sleepervolumes from coordinates x1,z1 to x2,z2
cpm-targetedhorde, targetedhorde	Spawn targeted horde near a (or all) player or coordinate	Spawn targeted horde near a (or all) player.Usage: th <steam id/player name/entity id> <qntd> or th all <qntd> or th <x> <y> <z> <qntd>
cpm-teleportplayerhome, teleportplayerhome	teleport a player to his home (on bedroll)	Usage: teleportplayerhome <steam id / player name / entity id>
cpm-timerba, timerba	Bloodboon aware generic timer to run commands.	Usage: timerba <minutes> <countdownMessage> <command(s)> timerba stop Use {Minutes} in <countdownMessage> for showing the number of minutes left in the message. For multiple commands use ; as seperator. For commands that have parameters with spaces enclose them in single quotes
cpm-tooltip, tooltip	Show a tooltip on a specific connected client	Show a tooltip on a specific connected client Usage: tooltip <Name/EntityId/SteamId/all> <tooltipName>
teleport2bag	Teleport player to his/her backpack after death.	Usage: tp2bag <Name/SteamID/EntityID>
cpm-tprotect, tprotect	Set protection to a location in same way as trader.	Usage: 1. tprotect <add/del> <x1> <x2> <z1> <z2> 2. tprotect <add/del> <x>@<qnt> <z>@<qnt> 3. tprotect <add/del> <qnt> <qnt> 4. tprotect p1 5. tprotect p2 <add/del> 6. tprotect radius <radius> <steamId/entityId/Name> <add/del> 1. protect or unprotect blocks from x1,z1 to x2,z2 2. protect or unprotect blocks from x,z each quantity. Quantity can be posivite or negative. 3. protect or unprotect blocks from your position each quantity. Quantity can be posivite or negative. 4. Store your position to be used on method 5. p1 store player position 5. protect or unprotect block from position stored on method 4 until your current location. 6. protect or unprotect blocks within boundaries on <radius> distance from <steamId/entityId/Name> position.
cpm-traderlist, traderlist	List Trader Areas	Usage: 1. traderlist
cpm-unlockall, unlockall	unlock all secure loots, chests, signs and doors for the current player.	Unlock all secure loots, chests, signs and doors for the current player.
cpm-w2l, w2l	Write to console.	Usage: 1. w2l <msg> 2. w2l command <command> [splitlog] 1. Write string <msg> to log 2. Write output of command <command> to log. Use parameter "splitlog" for 1 logline per outputline.
wipeinventory	Reset a player's inventory completely or partially (bag, belt and equipment).	Usage: wi <platformID> [bag] [belt] [equipment] [all]
cpm-wlf, wlf	Adds all friends of a player to whitelist(s) of their claim(s)	Adds all friends of a player to whitelist(s) of their claim(s) Usage: wlf add <Name/EntityId/SteamId> wlf del <Name/EntityId/SteamId>
cpm-wpc, wpc	Manage CPM waypoints	Add/Remove/List waypoints Usage: wpc add <name> <x> <y> <z> wpc remove <name> wpc list
creativemenu	enables/disables the creativemenu
debuff	Removes a buff from the local player
debuffplayer	Remove a buff from a player	Usage: debuffplayer <player name / steam id / entity id> <buff name> Remove the given buff from the player given by the player name or entity id (as given by e.g. "lpi").
debugmenu	enables/disables the debugmenu
debugshot	Creates a screenshot with some debug information	Usage: debugshot [save perks] Lets you make a screenshot that will have some generic info on it and a custom text you can enter. Also stores a list of your current perk levels in a CSV file next to it if the optional parameter 'save perks' is set to true
debugweather	Dumps internal weather state to the console.
decomgr
dms	Gives control over Dynamic Music functionality.	No commands available for dms at the moment.
dof	Control DOF
Dynamic mesh	Dynamic mesh
Dynamic mesh debug	Dynamic mesh debug
enablerendering	enable/disable live map rendering
exhausted	Makes the player exhausted.
exportcurrentconfigs	Exports the current game config XMLs	Exports all game config XMLs as they are currently used (including applied patches from mods) to the folder "Configs" in the save folder of the game. If run from the main menu it exports the XUi configs for the menu, if run from a game session will export all others.
exportprefab	Exports a prefab from a world area	Usage: exportprefab <name> <x1> <y1> <z1> <x2> <y2> <z2> [part] Exports a prefab with the given name from a box defined by the coordinate pair of two corners If the optional parameter 'part' is 'true' it will export into the 'Parts' subfolder of the prefabs folder
floatingorigin
fov	Camera field of view
gamestage	Shows the gamestage of the local player
getgamepref	Gets game preferences	Get all game preferences or only those matching a given substring
getgamestat	Gets game stats	Get all game stats or only those matching a given substring
getlogpath	Get the path of the logfile the game currently writes to
getoptions	Gets game options	Get all game options on the local game
gettime	Get the current game time
gfx	Graphics commands	Graphics commands: af <value> - anisotropic filtering off, on or force on (0, 1, 2) dr <scale> <min> <max> - set dynamic res scale (0 auto, .1 to 1 force, -1 for off) and min/max FPS dt <value> - toggle distant terrain or set value (0 or 1) dti <value> - set distant terrain instancing (0 or 1) dtmaxlod <value> - set distant terrain max LOD (0 to 5) dtpix <value> - set distant terrain pixel error (1 to 200) graph # - 0 removes all graphs, 1+ sets graphs height graph cvar <name> <count> <max> - show graph of a cvar with line count (0 hides) and max graph value (default is 1) graph dr <count> - show dynamic res graph with line count (0 hides) graph fps <count> <fps max> - show fps graph with line count (0 hides) and max graph fps graph pe <name> <count> <max> - show graph of a passive effect (healthmax..) with line count (0 hides) and max graph value (default is 1) graph stat <name> <count> <max> - show graph of a stat (health, stamina..) with line count (0 hides) and max graph value (default is 1) graph tex <name> <count> - show texture graph (mem, stream) with line count (0 hides) key name <value> - set shader keyword (0 or 1) pp name <value> - set postprocessing name (enable, ambientOcclusion (ao), auto exposure (ae), bloom, colorGrading (cg), etc.) to value (0 or 1) res <width> <height> - set screen resolution skin <value> - set skin bone count (1, 2, 4, 5+ (all)) st name <value> - set streaming name (budget (0 disables), discard, forceload, reduction) to value tex - show texture info texlimit <value> - set limit (0-x)
give	give an item to a player (entity id or name)	Give an item to a player by dropping it in front of that player Usage: give <name / entity id> <item name> <amount> give <name / entity id> <item name> <amount> <quality> Either pass the full name of a player or his entity id (given by e.g. "lpi"). Item name has to be the exact name of an item as listed by "listitems". Amount is the number of instances of this item to drop (as a single stack). Quality is the quality of the dropped items for items that have a quality.
givequest	usage: givequest questname
giveself	usage: giveself itemName [qualityLevel=6] [count=1] [putInInventory=false] [spawnWithMods=true]
giveselfxp	usage: giveselfxp 10000	Give yourself experience Usage: giveselfxp <number> [1 (use xp bonuses)]
givexp	Give XP to a player	Give a player experience points Usage: givexp <entity id / player name / user id> <number>
help	Help on console and specific commands	Usage: 1. help 2. help * <searchstring> 3. help <command name> 1. Show general help and list all available commands 2. List commands where either the name or the description contains the given text 3. Show help for the given command
junkDrone	Local player junk drone queries.
kick	Kicks user with optional reason. "kick playername reason"
kickall	Kicks all users with optional reason. "kickall reason"
kill	Kill a given entity	Kill a given entity. Usage: 1. kill <entity id> 2. kill <player name / steam id> 1. can be used to kill any entity that can be killed (zombies, players). 2. can only be used to kill players.
killall	Kill all entities	Kills all matching entities (but never players) Usage: killall (all enemies) killall alive (all EntityAlive types except vehicles and turrets) killall all (all types)
listgameobjects	List all active game objects
lights	Light debugging	Light debugging: v - toggle viewer enable off - viewer lights off on - viewer lights on clearreg - clear registered disableall - enableall - lod - toggle viewer LODs list - list all lights listfile - list all lights to Lights.txt liste - list lights effecting the player position
listents	lists all entities
listitems	lists all items that contain the given substring	List all available item names Usage: 1. listitems <searchString> 2. listitems * 1. List only names that contain the given string. 2. List all names.
listknownplayers	lists all players that were ever online	Usage: 1. listknownplayers 2. listknownplayers -online 3. listknownplayers -notbanned 4. listknownplayers <player name / userid> 1. Lists all players that have ever been online 2. Lists only the players that are currently online 3. Lists only the players that are not banned 4. Lists all players whose name contains the given string or matches the given UserID
listlandprotection	lists all land protection blocks and owners	Usage: 1. listlandprotection summary 2. listlandprotection <user id / player name / entity id> [parseable] 3. listlandprotection nearby [length] 1. Lists only players that own claimstones, the number they own and the protection status 2. Lists only the claims of the player given by his UserID / entity id / playername, including the individual claim positions. If "parseable" is specified the output of the individual claims will be in a format better suited for programmatical readout. 3. Lists claims in a square with edge length of 64 (or the optionally specified size) around the executing player
listplayerids	Lists all players with their IDs for ingame commands
listplayers	lists all players
listthreads	lists all threads
loggamestate	Log the current state of the game	Writes information on the current state of the game (like memory usage, entities) to the log file. The section will use the message parameter in its header. Usage: loggamestate <message> [true/false] Message is a string that will be included in the header of the generated log section. The optional boolean parameter specifies if this command should be run on the client (true) instead of the server (false) which is the default.
loglevel	Telnet/Web only: Select which types of log messages are shown	Select which types of log messages are shown on the connection you enter this command. By default all log messages are printed on every connection. Usage: loglevel <loglevel name> <true/false> Log levels: INF, WRN, ERR, EXC or ALL Example: Disable display of WRN messages: loglevel WRN false
logPlayerOwnedEntities	Logs player owned entities.
mapdata	Writes some map data to an image	Usage: 1. mapdata 2. mapdata start
mem	Prints memory information and unloads resources or changes garbage collector	Commands: clean - cleanup memory pools pools - list memory pools gc - show GC info gc alloc <value> - allocate k value of temp memory gc c - run collection gc enable <value> - enable GC (0 or 1) gc inc <value> - run incremental collect for value ms gc inctime <value> - set incremental collect time in ms obj [mode] - list object pool (active or all) objs - shrink object pool log [interval] - start/stop logging of performance data to a file
memcl	Prints memory information on client and calls garbage collector	Commands: clean - cleanup memory pools pools - list memory pools gc - show GC info gc alloc <value> - allocate k value of temp memory gc c - run collection gc enable <value> - enable GC (0 or 1) gc inc <value> - run incremental collect for value ms gc inctime <value> - set incremental collect time in ms obj [mode] - list object pool (active or all) objs - shrink object pool log [interval] - start/stop logging of performance data to a file
networkclient	Client side network commands	Commands: latencysim <min> <max> - sets simulation in millisecs (0 min disables) packetlosssim <chance> - sets simulation in percent (0 - 50)
networkserver	Server side network commands	Commands: latencysim <min> <max> - sets simulation in millisecs (0 min disables) packetlosssim <chance> - sets simulation in percent (0 - 50)
newave	Test new HD stuff.	Usage: 1. newave
occlusion	Control OcclusionManager
openiddebug	enable/disable OpenID debugging
pirs	tbd	tbd
placeblockrotations	Places all rotations of the currently held block	Places the block you currently hold in your hand in all supported rotations. Starts at the current selection box and spreads out towards the right relative to the current view direction of the player. Spaces out each block by 1m meter.
placeblockshapes	Places all shapes of the currently held variant helper block	Places all variants of the helper block you currently hold in your hand. Starts at the current selection box and spreads out towards the right relative to the current view direction of the player, starting a new row behind those every 25 blocks. Spaces out each block by 1m meter.
pois	Switches distant POIs on/off	Use on or off or only the command to toggle
pplist	Lists all PersistentPlayer data
prefab	Prefab commands	Prefab commands: clear export merge load save thumbnail density <match density> <set density> - set density of non air blocks that match
prefabupdater		Update prefabs for newer game builds. Usage: 1. prefabupdater loadxml <xmlfile> 2. prefabupdater clearxml 3. prefabupdater createmapping <prefabname> 4. prefabupdater loadtable [nametablefile] 5. prefabupdater unloadtables 6. prefabupdater updateblocks 1. Load a blocks.xml that has the information about the prefabs to be updated. If you have a modded XML first load that modded XML and afterwards load the XML provided with the game for legacy prefabs. The xmlfile-parameter can either be relative to the game's base directory or an absolute path (for pre-Alpha 17 prefabs). 2. Unload the data loaded with loadxml. 3. Create a block mapping file for the given prefab(s). Accepts '*' as wildcard (for pre-Alpha 17 prefabs). 4. Load a block name mapping file. File path is relative to the game directory if not specified as absolute path. If no file is given the default file supplied with the game is loaded (BlockUpdates.csv). 5. Unload the data loaded with loadtable. 6. Update the block mappings in prefabs with the block name mapping table loaded by 4.
profilenetwork	Writes network profiling information
profiling	Enable Unity profiling for 300 frames
reloadentityclasses, rec	reloads entityclasses xml data.
reloadwebpermissions	force reload of web permissions file
removelandprotection	removes the association of a land protection block to the owner	Usage: 1. removelandprotection <userid> 2. removelandprotection <x> <y> <z> 3. removelandprotection nearby [length] 1. Remove all land claims owned by the user with the given UserID 2. Remove only the claim block on the exactly given block position 3. Remove all claims in a square with edge length of 64 (or the optionally specified size) around the executing player
removequest	usage: removequest questname
rendermap	render the current map to a file
repairchunkdensity	check and optionally fix densities of a chunk	This command is used to check if the densities of blocks in a chunk match the actual block type. If there is a mismatch it can lead to the chunk rendering incorrectly or not at all, typically indicated by the error message "Failed setting triangles. Some indices are referencing out of bounds vertices.". It can also fix such mismatches within a chunk. Usage: 1. repairchunkdensity <x> <z> 2. repairchunkdensity <x> <z> fix 1. Just checks the chunk and prints mismatched to the server log. x and z are the coordinates of any block within the chunk to check. 2. Repairs any mismatch found in the chunk.
reply	send a message to the player who last sent you a PM	Usage: reply <message> Send the given message to the user you last received a PM from.
resetallstats	Resets all achievement stats (and achievements when parameter is true)
saveworld	Saves the world manually.
say	Sends a message to all connected clients
sayplayer	send a message to a single player	Usage: pm <player name / steam id / entity id> <message> Send a PM to the player given by the player name or entity id (as given by e.g. "lpi").
ScreenEffect	Sets a screen effect	ScreenEffect [name] [intensity] [fade time] ScreenEffect clear ScreenEffect reload
setgamepref	sets a game pref
setgamestat	sets a game stat
settargetfps	Set the target FPS the game should run at (upper limit)	Set the target FPS the game should run at (upper limit). Usage: 1. settargetfps 2. settargetfps <fps> 1. gets the current target FPS. 2. sets the target FPS to the given integer value, 0 disables the FPS limiter.
settempunit	Set the current temperature units.	Set the current temperature units. Usage: 1. settempunit F 2. settempunit C 1. sets the temperature unit to Fahrenheit. 2. sets the temperature unit to Celsius.
settime	Set the current game time	Set the current game time. Usage: 1. settime day 2. settime night 3. settime <time> 4. settime <day> <hour> <minute> 1. sets the time to day 1, 12:00 pm. 2. sets the time to day 2, 12:00 am. 3. sets the time to the given value. 1000 is one hour. 4. sets the time to the given day/hour/minute values.
show	Shows custom layers of rendering.
showalbedo	enables/disables display of albedo in gBuffer
showchunkdata	shows some date of the current chunk
showClouds	Artist command to show one layer of clouds.	type "showClouds myCloudTexture" where "myCloudTexture" is the name of the texture you want to see. type "showClouds" to turn off this view. Note: cloud textures MUST be locasted at ./resources/textures/environment/spectrums/default
showhits	Show hit entity locations
showinventory	list inventory of a given player	Usage: showinventory <user id / player name / entity id> [tag] Show the inventory of the player given by his UserID, player name or entity id (as given by e.g. "lpi"). Optionally specify a tag that is included in each line of the output. In this case output is designed to be easily parseable by tools. Note: This only shows the player's inventory after it was first sent to the server which happens at least every 30 seconds.
shownexthordetime	Displays the wandering horde time
shownormals	enables/disables display of normal maps in gBuffer
showspecular	enables/disables display of specular values in gBuffer
showswings	Show melee swing arc rays
showtriggers	Sets the visibility of the block triggers.
shutdown	shuts down the game
sleeper	Show sleeper info
sleeperreset	Show sleeper info
smoothworldall	Applies some batched smoothing commands.	Usage: 1. smoothworldall [passes] [noregion] 2. smoothworldall <worldname> [passes] [noregion] Arguments: passes: Integer number, overriding the default of 5 passes noregion: If passed in literally it will write the resulting heightmap to the dtm.raw instead of updating all of the worlds region files worldname: If specified the command is applied to the given world instead of the currently loaded world
spawnairdrop	Spawns an air drop
spawnentity	spawns an entity
spawnentityat	Spawns an entity at a give position	Usage: 1. spawnentityat 2. spawnentityat <entityidx> <x> <y> <z> 3. spawnentityat <entityidx> <x> <y> <z> <count> 4. spawnentityat <entityidx> <x> <y> <z> <count> <rotX> <rotY> <rotZ> 5. spawnentityat <entityidx> <x> <y> <z> <count> <rotX> <rotY> <rotZ> <stepX> <stepY> <stepZ> 6. spawnentityat <entityidx> <x> <y> <z> <count> <rotX> <rotY> <rotZ> <stepX> <stepY> <stepZ> <spawnerType> 1. Lists the known entity class names 2. Spawns the entity with the given class name at the given coordinates 3. As 2. but spawns <count> instances of that entity type 4. As 3. but also specifies the rotation of the spawned entities 5. As 4. but also specify the step distance between entities 6. As 5. but also specify the spawner source of the entity (Dynamic, StaticSpawner, Biome)
spawnscouts	Spawns zombie scouts	Spawn scouts near a player.Usage: 1. spawnscouts 2. spawnscouts <player name/steam id/entity id> 3. spawnscouts <x> <y> <z> 1. Will spawn the scouts near the issuing player. Can only be used by a player, not a remote console. 2. Spawn scouts near the given player. 3. Spawn scouts at the given coordinates.
SpawnScreen	Display SpawnScreen	SpawnScreen on/off
spawnsupplycrate	Spawns a supply crate where the player is
spawnwanderinghorde	Spawns a wandering horde of zombies
spectatormode	enables/disables spectator mode
spectrum	Force a particular lighting spectrum.	spectrum <Auto, Biome, BloodMoon, Foggy, Rainy, Stormy, Snowy>
stab	stability
starve	Makes the player starve (optionally specify the amount of food you want to have in percent).
switchview	Switch between fpv and tpv
SystemInfo	List SystemInfo
teleport	Teleport the local player	Usage: 1. teleport <x> <y> <z> [view direction] 2. teleport <x> <z> [view direction] 3. teleport <target steam id / player name / entity id> 4. teleport offset <inc x> <inc y> <inc z> For 1. and 2.: view direction is an optional specifier to select the direction you want to look into after teleporting. This can be either of n, ne, e, se, s, sw, w, nw or north, northeast, etc. 1. Teleports the local player to the specified location. Use y = -1 to spawn on ground. 2. Same as 1 but always spawn on ground. 3. Teleports to the location of the given player 4. Teleport the local player to the position calculated by his current position and the given offsets
teleportplayer	Teleport a given player	Usage: 1. teleportplayer <user id / player name / entity id> <x> <y> <z> [view direction] 2. teleportplayer <user id / player name / entity id> <target user id / player name / entity id> 1. Teleports the player given by his UserID, player name or entity id (as given by e.g. "lpi") to the specified location. Use y = -1 to spawn on ground. Optional argument view direction allows you to speify a direction you want to look in after teleporting. This can be either of n, ne, e, se, s, sw, w, nw or north, northeast, etc. 2. As 1, but destination given by another (online) player
testDismemberment	Dismemberment testing toggled.
testloop	Test code in a loop	Commands: p - player
thirsty	Makes the player thirsty (optionally specify the amount of water you want to have in percent).
tppoi
traderarea	...	...
trees	Switches trees on/off	trees - toggles trees <value> - (off, on)
twitch	usage: twitch <command> <params>
updatelighton	Commands for UpdateLightOnAllMaterials and UpdateLightOnPlayers	Commands for UpdateLightOnAllMaterials and UpdateLightOnPlayers
version	Get the currently running version of the game and loaded mods
visitmap	Visit an given area of the map. Optionally run the density check on each visited chunk.	Usage: 1. visitmap <x1> <z1> <x2> <z2> [check] 2. visitmap stop 1. Start visiting the map in the rectangle specified with the two edges defined by coordinate pairs x1/z1 and x2/z2. If the parameter "check" is added each visited chunk will be checked for density issues. 2. Stop the current visitmap run.
water	Control water settings	water limit [value] - how many water flow updates can run at a time
weather	Control weather settings	Clouds [0 to 1 (-1 defaults)] Fog [density (-1 defaults)] [start] [end] FogColor [red (-1 defaults)] [green] [blue] Rain [0 to 1 (-1 defaults)] Wet [0 to 1 (-1 defaults)] Snow [0 to 1 (-1 defaults)] SnowFall [0 to 1 (-1 defaults)] Temp [-99 to 101 (< -99 defaults)] Wind [0 to 200 (-1 defaults)] SimRand [0 to 1 (-1 defaults)] Defaults or d
weathersurvival	Enables/disables weather survival
webpermission	Manage web permission levels	Set/get permission levels required to access a given web functionality. Default level required for functions that are not explicitly specified is 0. Usage: webpermission add <webfunction> <level> webpermission remove <webfunction> webpermission list
webstat	DEBUG PURPOSES ONLY
webtokens	Manage web tokens	Set/get webtoken permission levels. A level of 0 is maximum permission. Usage: webtokens add <username> <usertoken> <level> webtokens remove <username> webtokens list
whitelist	Manage whitelist entries	Set/get whitelist entries. Note: If there is at least one entry on the list no user who is not on this list will be able to join the server! Usage: whitelist add <name / entity id / platform + platform user id> [displayname] whitelist remove <name / entity id / platform + platform user id> whitelist addgroup <steam id> [displayname] whitelist removegroup <steam id> whitelist list To use the add/remove sub commands with a name or entity ID the player has to be online, the variant with platform and platform ID can be used for currently offline users too. Displayname can be used to put a descriptive name to the ban list in addition to the user's platform ID. If used on an online user the player name is used by default.
workstationmaterials	Set material counts on workstations.	Set the material count for the given material slot on the currently opened workstation to the given value. Usage: wsmats <slot> <count> Slot specifies the index of the material slot in the workstation, e.g. 0 on forge is iron.Count defines to what you want to set the material count with a maximum of 30000.
xui	Execute XUi operations	Usage: xui open <window group name> [instance] [closeOthers] xui close <window group name> [instance] xui reload [window group name] [instance] xui list <"instances" / "windows"> [instance]